|
HEATERS & TORCHES
  
 |
The
HK 150 Mobile Glycol Heating System |
| The HK 150
is the newest addition to the Heat King family. This unit was
designed with the residential contractor in mind. Quiet, compact
and efficient yet powerful enough to thaw ground, cure concrete or
provide temporary heat for up to 2 new home sites at once |
 |
Features: |
Thaw up to 2,800 sq. ft.
Cure up to 5,600 sq. ft.
Temporary Heat up to 8,000 sq. ft.
Computer controlled System
Remote Field Manifolds
Large Access Doors
Double Loop Technology
Enclosed Electric Hose Reel
CSA Certified |
 |
The HK 150 has all of the features and technology developed for
the HK 500 in a smaller package.
- Remote Supply & Return Manifolds
- Bi-directional Powered Reel
- 4 Large Doors for Easy Access
- Rubber Torsion Axle
- Balanced Lifting Hooks
- Durable Coil Style Heater
- Optional On-Board Air Compressor
|
Double
Loop Technology
The double loop technology developed for the HK 500 model is now
available in the HK 150. By using shorter hoses, more fluid and
higher efficiency pumps with increased flow the Heat King provides
more consistent temperature to the field for better concrete
curing and ground thawing results.
User Friendly Controls
The control panel is also derived from the HK 550. It features
large easy to use switches, digital supply and return temperature
controls with warning and operation lights for all components. The
entire system is protected by a ground fault interrupt breaker, a
large emergency stop button and is CSA certified for safety
assurance. |
 |
|
HK 150
Specifications
|
| Hose |
2 -
700' Field Hoses |
Heater
Capacity |
150,000
BTUH Heating Fuel Input |
| Supply
Manifold |
4-5/8"
& 1-1 1/4" quick connect |
Glycol
Tank |
60 US
GAL |
| Return
Manifold |
4-5/8"
& 1-1 1/4" quick connect |
Electrical
Requirements |
1 - 15
Amp Circuit |
| Ground
Thawing Capacity |
2,800
sq. ft. |
Generator
(Optional) |
1
- 3300W |
| Concrete
Curing Capacity |
5,600
sq. ft. |
Axle |
1 -
5,000lb Torsion Axle, Surge Brake |
| Temporary
Heating Capacity |
8,000
sq. ft. (Varies with R-Value) |
Hitch |
2"
Ball (Pintle also available) |
| Fuel
Pump |
1/3 Hp
Centrifugal |
Overall
Length |
12' |
| Circulating
Pump |
1/7 Hp
Centrifugal |
Overall
Width |
7' |
| Fuel
Tank |
90 US
GAL |
Overall
Height |
67" |
| Run
Time |
Up to
140 Hours |
Weight
(Fuel Empty/Full) |
3,300
/ 3,975 lbs |
| Foreman
Unit
Heaters |
AGA Certification
* One Year Warranty *
Direct Spark Ignition (Foreman 80, Foreman 170)
Automatic Gas Safety Shut-Off * Regulator *
POL with Excess Flow Valve (LP Models)
Totally Enclosed Motor
Remote Weather Tight Thermostat (Foreman 80, Foreman 170)
High-Temperature Safety Cut-Off Switch
Handle(s) * Wheels (Foreman 170) *
Gas Hose, 10 ft.
Optional 12’ Distribution Ducting (Foreman 80, Foreman 170) |
Foreman 80 (LP) 80,000 BTU
Foreman 170 (LP) 170,000 BTU
|
|
|
| Workman
Unit
Heaters |
| Highly
Portable: No
electricity required means they can be used almost anywhere.
Lightweight design for easy transport – all workman models weigh
less than 16 lbs.
Reliable: Proven
standard or direct spark piezo-type pilot light systems for sure
start every time. Sturdy design and rugged construction to
withstand rough handling. Heavy duty models to stand up to harsh
conditions
Choice of Models:
Heat output ranges available from
75,000 to 250,000 BTU/hr to fit your applications. Workman 100 and
250 offer variable BTU/hr output ranges for increased efficiency.
Workman and heavy duty models available for propane or natural gas |
100A-P (LP) 100,000 BTU
250A-P (LP) 250,000 BTU
Norseman 250
|
|
|
| Tradesman |
* AGA Certified
* One Year Warranty
* Direct Spark Ignition
* Motor overload protection
* Regulator
* High-temperature safety cut-off switch
* POL with excess flow valve
* 10 ft. gas hose
* Automatic gas safety shut-off
* Visual ignition monitor |
Tradesman 100 (LP) 100,000 BTU
Tradesman 155 (LP) 155,000 BTU
Tradesman 400 (LP) 150,000-400,000 BTU
Tradesman 155 (NG) 155,000 BTU
Tradesman 400 Ultra (LP) 400,000 BTU
|
The advantage of
spot heating is that only the areas needed, are heated.
(ie: in large warehouses, open shed and even outdoors, etc.)
Radiant heat travels in straight lines and does not rise to
the ceiling like hot air. |
 |
 |
VAL6 KBE55 vs
FORCED-AIR HEATER
 |
Uses all the heat it produces.
Unaffected by wind or rain.
Infrared heat always travels directly to the intended area.
Since it doesn't lose
heat in the air, it uses less fuel and produces more heat.
Provides a constant
source of heat indoors and outdoors.
 |
|
|
Item /
Model
|
KBE5S
|
| Heat
output |
111,000
BTU / h |
| Fuel |
Kerosene,
Diesel |
| Tank
Capacity |
9
gallons |
| Power
source |
120V.60Hz
single phase |
| Power
consumption |
80
W |
| Control
System |
2
sec. Prepurge
180 sec. Postpurge |
| Safety
device |
Photocell
flame monitor
3A Fuse |
| Burner
type |
High
pressure
spray gun type |
| External
dimension LxWxH |
27.3x25.8x36.1
in. |
| Dry
weight |
83.8
lbs. |
|
|
|
|
|
|
Item /
Model
|
KBE5S
|
| Heat
output |
51,800
BTU / h |
| Fuel |
Kerosene,
Diesel |
| Tank
Capacity |
2.6
gallons |
| Power
source |
120V.60Hz
single phase |
| Power
consumption |
105
W |
| Control
System |
5
sec. Prepurge
330 sec. Postpurge |
| Safety
device |
Photocell
flame monitor
3A Fuse |
| Burner
type |
High
pressure
spray gun type |
| External
dimension LxWxH |
23.1x12.2x23.1
in. |
| Dry
weight |
36
lbs. |
|
For complete Specifications
& Listing on these items and various Models Please Call any of
our Stores
or Contact your Sales Representative at
J.C.
Smith, Inc.
|
