Rollers & Compaction Equipment -- DYNAPAC -- STONE -- JC Smith, Inc

PRODUCT CATEGORIES & MANUFACTURERS

ROLLERS & COMPACTION EQUIPMENT

TANDEM VIBRATORY ROLLERS

LP 6500
Operating Weight: 696 kg
Speed: 3.6 Km/h
Vibration Frequency: 62.5 Hz
Centrifugal Force: 21 kN
Engine: Hatz 1D50S


CC 82 Operating Weight: 1570 kg Module Mass: Front 755 kg Rear 815 kg Speed: 10 Km/h Vibration Frequency: 68 Hz Centrifugal Force (Per Drum): 13 kN Engine: Hatz 2G40	CC 92 Operating Weight: 1590 kg Module Mass: Front 765 kg Rear 825 kg Speed: 10 Km/h Vibration Frequency: 68 Hz Centrifugal Force (Per Drum): 13 kN Engine: Hatz 2G40


CC 102 Operating Weight: 2350 kg Module Mass: Front 1130 kg Rear 1220 kg Speed: 10 Km/h Vibration Frequency: 56 Hz Centrifugal Force (Per Drum): 21.5 kN Engine: Deutz F2L 1011F	CC 122 Operating Weight: 2600 kg Module Mass: Front 1260 kg Rear 1340 kg Speed: 10 Km/h Vibration Frequency: 56 Hz Centrifugal Force (Per Drum): 25 kN Engine: Isuzu 3LD1 PW-05


CC 132 Operating Weight: 3270 kg Module Mass: Front 1635 kg Rear 1635 kg Speed: 9.8 Km/h Vibration Frequency: 51 Hz Centrifugal Force (Per Drum): 32 kN Engine: Deutz F2L 1011F	CC 142 Operating Weight: 3900 kg Module Mass: Front 1900 kg Rear 2000 kg Speed: 9.8 Km/h Vibration Frequency: 51 Hz Centrifugal Force (Per Drum): 32 kN Engine: Deutz F3L 1011F

HEAVY TANDEM VIBRATORY ROLLERS


CC 222 Operating Weight: 7300 kg Module Mass: Front 3600 kg Rear 3700 kg Speed: 13 Km/h Vibration Frequency: 52 / 70 Hz Centrifugal Force (Per Drum): 89 / 65 kN Engine: Deutz BF4L 1011F	CC 232 Operating Weight: 8000 kg Module Mass: Front 4000 kg Rear 4000 kg Speed: 13 Km/h Vibration Frequency: 52 / 70 Hz Centrifugal Force (Per Drum): 89 / 65 kN Engine: Deutz BF4L 1011F

CC 322
Operating Weight: 8300 kg
Module Mass: Front 4100 kg
Rear 4200 kg
Speed: 13 Km/h
Vibration Frequency: 49 / 49 Hz
Centrifugal Force: 104 / 43 kN
Engine: Deutz BF4L 1011F

VIBRATORY ROLLERS


CA 252 Operating Weight: 10050 kg Module Mass: Front 5450 kg Rear 4600 kg Speed: 9 Km/h Vibration Frequency: 30 / 33 Hz Centrifugal Force (Per Drum): 203 / 119 kN Engine: Cummins 4BTA 3.9	CA262 Operating Weight: 10500 kg Module Mass: Front 5500 kg Rear 5000 kg Speed: 9 Km/h Vibration Frequency: 30 / 33 Hz Centrifugal Force (Per Drum): 203 / 119 kN Engine: Cummins 6BT 5.9


CA 302 Operating Weight: 12600 kg Module Mass: Front 8100 kg Rear 4500 kg Speed: 9 Km/h Vibration Frequency: 30 / 30 Hz Centrifugal Force (Per Drum): 249 / 121 kN Engine: Cummins 4BTA 3.9	CA 362 Operating Weight: 13050 kg Module Mass: Front 8200 kg Rear 4850 kg Speed: 9 Km/h Vibration Frequency: 30 / 33 Hz Centrifugal Force (Per Drum): 249 / 146 kN Engine: Cummins 6BT 5.9


CA 512 Operating Weight: 15600 kg Module Mass: Front 10500 kg Rear 5100 kg Speed: 12 Km/h Vibration Frequency: 27 / 31 Hz Centrifugal Force: 260 / 195 kN Engine: Cummins 6BTA 5.9	CA 602 Operating Weight: 18600 kg Module Mass: Front 12700 kg Rear 5900 kg Speed: 12 Km/h Vibration Frequency: 27 / 31 Hz Centrifugal Force (Per Drum): 275 / 209 kN Engine: Cummins 6BTA 5.9

FORWARD PLATE COMPACTORS


LF 45 Operating Weight: 42 kg Frequency: 100 Hz Centrifugal Force: 8 kN Speed: Metres/min 25 Plate Width: 290 mm Engine: Robin EY08D	LF 62 Operating Weight: 60 kg Frequency: 92 Hz Centrifugal Force: 10 kN Speed: Metres/min 24 Plate Width: 330 mm Engine: Honda GX120


LF 72 Operating Weight: 63 kg Frequency: 92 Hz Centrifugal Force: 10 kN Speed: Metres/min 24 Plate Width: 400 mm Engine: Honda GX120	LF 72 Operating Weight: 65 kg Frequency: 92 Hz Centrifugal Force: 10 kN Speed: Metres/min 24 Plate Width: 400 mm Engine: Honda GX160


LF 82 Operating Weight: 81 kg Frequency: 90 Hz Centrifugal Force: 18 kN Speed: Metres/min 25 Plate Width: 460 mm Engine: Honda G200	LF 70 Operating Weight: 76 kg Frequency: 80 Hz Centrifugal Force: 10 kN Speed: Metres/min 22 Plate Width: 400 mm Engine: Honda GX120


LF 90 Operating Weight: 91 kg Frequency: 80 Hz Centrifugal Force: 14 kN Speed: Metres/min 25 Plate Width: 500 mm Engine: Honda GX120	LF 90 Operating Weight: 106 kg Frequency: 80 Hz Centrifugal Force: 14 kN Speed: Metres/min 25 Plate Width: 500 mm Engine: Yanmar L40AE


LF 15A Operating Weight: 78 kg Frequency: 92 Hz Centrifugal Force: 10 kN Speed: Metres/min 28 Plate Width: 520 mm Engine: Honda GX120	LF 85 Operating Weight: 106 kg Frequency: 100 Hz Centrifugal Force: 11 kN Speed: Metres/min 22 Plate Width: 520 mm Engine: Robin EY15D


LF 140 Operating Weight: 128 kg Frequency: 85 Hz Centrifugal Force: 21 kN Speed: Metres/min 24 Plate Width: 500 mm Engine: Honda GX160	LF 140 Operating Weight: 138 kg Frequency: 85 Hz Centrifugal Force: 21 kN Speed: Metres/min 24 Plate Width: 500 mm Engine: Yanmar L40AE


CM 13 Operating Weight: 129 kg Frequency: 75 Hz Centrifugal Force: 16 kN Speed: Metres/min 25 Plate Width: 460 mm Engine: Honda GX160	CM 13 Operating Weight: 162 kg Frequency: 75 Hz Centrifugal Force: 16 kN Speed: Metres/min 25 Plate Width: 460 mm Engine: Hatz E673LS

LX 90
Operating Weight: 99 kg
Frequency: 75 Hz
Speed: Metres/min 25
Plate: Width 450 mm Height 920 mm
Engine: Honda GX160

FORWARD & REVERSE PLATE COMPACTORS


LG 140 Operating Weight: 154 kg Frequency: 65 Hz Centrifugal Force: 22 kN Speed: Metres/min 25 Plate Width: 330 mm Engine: Honda GX160 (Petrol)	LG 140 Operating Weight: 181 kg Frequency: 65 Hz Centrifugal Force: 22 kN Speed: Metres/min 25 Plate Width: 330 mm Engine: Farymann 15D (Diesel)


LG 160 Operating Weight: 158 kg Frequency: 82 Hz Centrifugal Force: 35 kN Speed: Metres/min 25 Plate Width: 450 mm Engine: Honda GX160 (Petrol)	LG 160 Operating Weight: 187 kg Frequency: 82 Hz Centrifugal Force: 35 kN Speed: Metres/min 25 Plate Width: 450 mm Engine: Farymann 15D (Diesel)


LG 200 Operating Weight: 222 kg Frequency: 65 Hz Centrifugal Force: 36 kN Speed: Metres/min 25 Plate Width: 500 mm Engine: Honda GX160 (Petrol)	LG 200 Operating Weight: 235 kg Frequency: 65 Hz Centrifugal Force: 36 kN Speed: Metres/min 25 Plate Width: 500 mm Engine: Hatz 1 B20 (Diesel)


LH 300 Operating Weight: 337 kg Frequency: 68 Hz Centrifugal Force: 40 kN Speed: Metres/min 22 Plate Width: 450 mm Engine: Hatz 1B30 (Diesel)	LH 300 Operating Weight: 327 kg Frequency: 68 Hz Centrifugal Force: 40 kN Speed: Metres/min 22 Plate Width: 450 mm Engine: Hatz 1B30 (Diesel) (Electric Starter)


LH 300 Operating Weight: 322 kg Frequency: 68 Hz Centrifugal Force: 40 kN Speed: Metres/min 22 Plate Width: 450 mm Engine:Honda GX270 (Petrol) (Electric Starter)	LG 500 Operating Weight: 478 kg Frequency: 60 Hz Centrifugal Force: 60 kN Speed: Metres/min 24 Plate Width: 550 mm or 750 mm Engine: Hatz Supra 1D60Z

LH 700
Operating Weight: 768 kg
Frequency: 53 Hz
Centrifugal Force: 95 kN
Speed: Metres/min 30
Plate Width: 660 mm
Engine: Hatz 1D90V

TRENCH COMPACTORS

LP 852
Operating Weight: 1670 kg
Frequency: 30 Hz
Centrifugal Force: 65 kN
Speed: 4 km/h
Drum Diameter: 535 mm
Drum Width: 630 / 850 mm
Engine: Hatz 2G40

TAMPERS-RAMMERS


LT 600 Operating Weight: 64 kg Frequency: 12 Hz Speed: Metres/min 15-18 Plate: Width 230 mm Length 330 mm Engine: Honda 4-Stroke GX100	LT 700 Operating Weight: 74 kg Frequency: 12 Hz Speed: Metres/min 15-18 Plate: Width 280 mm Length 330 mm Engine: Honda 4-Stroke GX120

LT 800
Operating Weight: 84 kg
Frequency: 12 Hz
Speed: Metres/min 13-16
Plate: Width 280 mm Length 330 mm
Engine: Hatz 1B20

Vibratory Roller Compactor

The PavingProTM walk-behind roller series delivers excellent compaction performance with close approach capability in confined spaces and around obstacles. Convenient controls make operation safe and easy, and quality construction keeps your equipment rolling day in and day out. Plus, MMD Equipment is proud to offer the PavingPro 66ST - a steerable vibrating walk-behind roller that brings a whole new dimension of maneuverability and ease of operation to compaction applications.

	PavingPro 270 Ride-On Roller Engine Honda GX610 Vibrating Frequency 4,000 vpm Centrifugal Force 3,000 lbs Speed 3.8 mph (working, 4.7 mph (travel)
	PavingPro 66ST Steerable Walk-Behind Roller Engine Honda GX390 Vibrating Frequency 3,090 vpm Centrifugal Force 1,200 lbs Speed 0 - 2.2 mph
	PavingPro 70 Walk-Behind Roller Engine Honda GX390 (70H) Yammar L100EE (70Y) Vibrating Frequency 3,300 vpm Centrifugal Force 3,000 lbs Speed 0 - 2.2 mph
	PavingPro 80 Walk-Behind Roller Engine Honda GX390 (80H) Yammar L100EE (80Y) Vibrating Frequency 3,300 vpm Centrifugal Force 3,500 lbs Speed 0 - 2.2 mph

Vibratory Plate & Rammer Compactors

CompactionPro 600 Vibratory Plate Compactor	CompactionPro 800 Vibratory Plate Compactor

Engine Honda GX120K1 Centrifugal Force 2,870 lbs Frequency 6,400 vpm Speed 96.8 ft/min	Engine Honda GX160K1 Centrifugal Force 3,640 lbs Frequency 6,000 vpm Speed 96.8 ft/min
CompactionPro 65 Rammer	CompactionPro 75 Rammer

Engine Honda GX100 Centrifugal Force 4,380 lbs Frequency 640-680 vpm Speed 40 ft/min	Engine Honda GX120 Centrifugal Force 5,110 lbs Frequency 680-720 vpm Speed 40 ft/min

Walk-Behind Compaction

Stone manufactures a variety of walk-behind compactors with superior performance, value-added features, and easy service including rammers, plates, trench rollers and walk-behind rollers.

	Stumpers Stone Stompers set the standard for superior handling, control and reliability. The broadest line of rammers to ever hit the dirt provides more engine selections and easier servicing - plus better overall performance - making them the authority for the new millennium.
	Forward Plates Stone Forward Plate - the #1 selling plate in North America delivers superior performance. Exclusive eccentric housing is an integral part of the base plate, so vibration is more effectively transferred to the ground. And, since the eccentric is mounted forward of the engine, Stone Forward Plates deliver faster travel speeds, higher amplitudes and increased climbability.
	Reversible Plates Superior compaction in any direction. Forward. Reverse. On the Spot. Ideal for compacting sand, gravel, and mixed soils in narrow trenches and along foundations, walls, and abutments.
	Bulldog Trench Roller Stone Bulldogs provide optimum productivity on all soils, work hard and deliver maximum total applied force for greater impact in a single pass. Bulldogs can function either as manual units or radio-frequency remote control units utilizing our exclusive Snap-Tek electronic system.
	Walk-Behind Roller Durable, rugged, reliable Stone Walk-Behind Vibratory Rollers are ideal for a wide variety of asphalt and soil compaction applications. Choose from single or dual drum models with internal vibration and heavy-duty machined steel drums.

XT728 SERIES
The All-Purpose Dynamo
Our most popular rammer, the XT728 series is available with a 2-cycle pre-mix or 2-cycle oil injected engine. It's the best choice for narrow trenches or tight compacting jobs. Offering an impact force of 2800 lb., it's an ideal, medium weight performer that won't quit on the job.	▪ Ideal for narrow trenches ▪ 2-cycle oil injection or pre-mix models ▪ Fits in an 11" trench ▪ Optional shoes in 4" or 5" widths with 8" or 14" extensions ▪ Gusseted, reinforced steel shoe for optimum durability ▪ Compacts lifts up to 18" ▪ Impact force up to 2800 lb. ▪ Productivity up to 4,950 sq. ft../hr.

Ride-On Compaction

The Stone ride-on compaction lines include the leading line in confined area asphalt rolling – Stone WolfPac™ Asphalt Rollers and the power and performance of the highly maneuverable Rhino® Dirt Roller line.

	WolfPac Asphalt Rollers Stone WolfPac Asphalt Rollers cover the territory in confined area asphalt compacting. Four unique rollers that are easy to use, easy to maintain and properly balanced to prevent scuffing or gouging, delivering extra smooth finishing on all kinds of surfaces.
	Rhino Dirt Rollers When it comes to tough compaction jobs, Stone Construction Equipment, Inc. Rhino Vibratory Dirt Rollers reign supreme over all the land. Choose from three h