Makita HR4010C 1-9/16" AVT Rotary Hammer - SDS-MAX Bits

Brand:Makita
Product Code:HR4010C
map not in use
Price: $1,170.00 $636.00
Qty:     - OR -   Add to Wish List Add to Compare

Makita HR4010C 1-9/16" AVT Rotary Hammer - SDS-MAX Bits

  • Powerful 11.0 AMP motor; efficient 1,350-2,750 BPM to handle the most demanding applications
  • Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater efficiency
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • L.E.D. power light indicates switch failure or cord damage
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
  • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Hammering Only" or "Hammering with Rotation"
  • One-touch sliding chuck for quick bit changes
  • Lock-on slide switch for continuous operation ("Hammering Only" mode)
  • Ergonomic soft grip provides more comfort and control
  • Externally accessible brushes for greater serviceability
  • 16.4 ft. jobsite cord for greater versatility and instant power
  • Accepts SDS-MAX bits
Capacity Concrete (w/core bits) 4-1/8"
No Load Speed   235 - 480 RPM
Blows per Minute   1,350 - 2,750 BPM
Impact Energy   9.5 Joules
    7.0 ft.lbs.
AMPS (120V)   11.0
Bit Type   Accepts SDS-MAX Bits
Overall Length   18-1/2"
Net Weight (lbs.)   14.8
  • Side Handle (416299-1)
  • D-Handle (417003-1)
  • Depth Gauge (321248-4)
  • Bit Grease (194683-7)
  • Tool Case (154677-4)

Write a review



Note: HTML is not translated!

Bad           Good



Inquiry about the product Makita HR4010C 1-9/16" AVT Rotary Hammer - SDS-MAX Bits

Your Name:


Your Email:


Message: Note: HTML is not translated!

Enter the code in the box below: