Makita HR4013C 1-9/16" AVT Rotary Hammer - SDS-MAX bits

Brand:Makita
Product Code:HR4013C
map not in use
Price: $1,170.00 $585.00
Qty:     - OR -   Add to Wish List Add to Compare

Makita HR4013C 1-9/16" AVT Rotary Hammer - SDS-MAX bits

  • Powerful 11 AMP motor delivers 8.4 ft.lbs. of impact energy to handle the most demanding applications
  • Anti-Vibration Technology (AVT®) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
  • Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
  • Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user
  • Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
  • Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • L.E.D. power light indicates switch failure or cord damage
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Chipping Only" or "Hammering with Rotation"
  • 24 bit angle settings allow the bit to be set at different positions for operating convenience
  • One-touch sliding chuck for quick bit changes
  • Side Handle (196792-8)
  • Depth Rod (331955-1)
  • Side Grip Assembly (123138-5)
  • Bit Grease (194683-7)
  • Cloth F/Wiping Oil (443122-7)
AMPS   11
Capacity (concrete)   1-9/16"
Impact Energy (Joules)   11.4 J
No Load Speed   250-500 RPM
Blows Per Minute (variable speed)   1,450 - 2,900 BPM
Bit Type   Accepts SDS-MAX
Overall Length   18-11/16"
Cord Length (ft)   16.4'
Net Weight   15.1 lbs.

Write a review



Note: HTML is not translated!

Bad           Good



Inquiry about the product Makita HR4013C 1-9/16" AVT Rotary Hammer - SDS-MAX bits

Your Name:


Your Email:


Message: Note: HTML is not translated!

Enter the code in the box below: