Makita HR4041C 1-9/16" Rotary Hammer - Spline Bits

Brand:Makita
Product Code:HR4041C

Makita HR4041C 1-9/16" Rotary Hammer - Spline Bits

  • Powerful 12.0 AMP Motor delivers 230-460 RPM and 1,300-2,600 BPM for the most demanding applications
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
  • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Hammering Only" or "Hammering with Rotation" for multiple applications
  • "No hammering when idling" function helps increase tool life
  • High quality aluminum housing allows for greater durability and longer tool life
  • Accepts Spline bits
Capacity Concrete 1-9/16"
  Core Bit 4-5/8"
No Load Speed   230 - 460 RPM
Blows per Minute   1,300 - 2,600 BPM
Impact Energy   9.2 Joules
    6.8 ft.lbs.
AMPS (110V)   12.0
Bit Type   Spline Bits
Cord Length   16.4 ft.
Overall Length   16-7/8"
Net Weight (lbs.)   14.8
  • Side Handle (416549-4)
  • Depth Gauge (321248-4)
  • Tool Case

Write a review



Note: HTML is not translated!

Bad           Good



Inquiry about the product Makita HR4041C 1-9/16" Rotary Hammer - Spline Bits

Your Name:


Your Email:


Message: Note: HTML is not translated!

Enter the code in the box below: