Makita HR5210C 2" AVT Rotary Hammer - SDS-MAX Bits

Brand:Makita
Product Code:HR5210C
map not in use
Price: $1,920.00 $1,152.00
Qty:     - OR -   Add to Wish List Add to Compare

Makita HR5210C 2" AVT Rotary Hammer - SDS-MAX Bits

  • Powerful 15.0 AMP motor delivers 1,075-2,150 BPM to handle the most demanding applications
  • Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • L.E.D. power light indicates switch failure or cord damage
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential Impact Timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
  • Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
  • Extended life brushes are longer for more work between service intervals and less downtime
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • "No hammering when idling" function helps increase tool life
  • 2-mode operation for "Hammering Only" or "Hammering with Rotation"
  • One-touch sliding chuck for quick bit changes
  • Lock-on slide switch for continuous operation ("Hammering Only" mode)
  • Rubberized ergonomic soft grip provides more comfort and control
  • Recessed operation mode switch helps prevent it from being damaged
  • Accepts SDS-MAX bits
  • Side Handle (158057-6)
  • D-Handle (417003-1)
  • Depth Gauge (321248-4)
  • Bit Grease (194683-7)
  • Tool Case
Capacity Concrete (w/core bits) 6-1/4"
No Load Speed   130 - 260 RPM
Blows per Minute   1,075 - 2,150 BPM
Impact Energy   20.0 Joules
    14.8 ft.lbs.
AMPS (120V)   15.0
Bit Type   Accepts SDS-MAX Bits
Overall Length   23-1/2"
Net Weight (lbs.)   26.9

Write a review



Note: HTML is not translated!

Bad           Good



Inquiry about the product Makita HR5210C 2" AVT Rotary Hammer - SDS-MAX Bits

Your Name:


Your Email:


Message: Note: HTML is not translated!

Enter the code in the box below: