Makita HR5212C AVT Rotary Hammer 2-Inch SDS Max

Brand:Makita
Product Code:HR5212C
map not in use
Price: $1,100.00
Qty:     - OR -   Add to Wish List Add to Compare

Makita HR5212C AVT Rotary Hammer 2-Inch SDS Max

  • Powerful 15 AMP motor delivers 14 ft.lbs. / 19 J. of impact energy to handle the most demanding applications
  • Advanced Anti-Vibration Technology (AVT®) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
  • Advanced AVT® includes an air actuated counterbalance that directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the hammer mechanism to effectively reduce vibration
  • Advanced AVT® includes a vibration absorbing housing with a spring loaded back handle and housing which moves independently of the motor and hammer mechanism effectively isolating more vibration away from the user
  • Advanced AVT® includes an integrated damper spring at the base of the impact bolt engineered to absorb impact vibrations from the drill bit
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more precision and better accuracy
  • "Soft no-load" function automatically reduces the speed of the motor when idling to help increase tool life and performance
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
  • L.E.D. power light indicates switch failure or cord damage
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Chipping Only" or "Hammering with Rotation"
  • Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation
  • 24 bit angle settings allow the bit to be set at different positions for operating convenience
  • One-touch sliding chuck for quick bit changes
  • Includes a 16.4 ft. power cord for user convenience
  • (1) DEPTH ROD, HR4013C (331955-1)
  • (1) Hammer Bit Grease (194683-7)
  • (1) CLOTH F/WIPING OIL (443122-7)
  • (1) D-handle (417003-1)
  • (1) Accessory Case (0000)
  • (1) Straight Handle Assembly (135629-4) (135629-4)
  • (1) Straight Handle (454781-2) (454781-2)
Specifications:
AMPS   15
Capacity (concrete drilling)   2"
Capacity (concrete drilling w/ core bit)   6-1/4"
Impact Energy (Joules)   19 J
Impact Energy (ft.lbs.)   14
Vibration (m/s²)   9
Blows Per Minute (variable speed)   1,100 - 2,250 BPM
No Load Speed (variable speed)   130 - 260 RPM
Overall Length   23-1/2"
Cord Length (ft)   16.4'
Net Weight   26.2 lbs.
Shipping Weight   42 lbs.
Bit Type   Accepts SDS-MAX
Power Type   Corded

Write a review



Note: HTML is not translated!

Bad           Good



Inquiry about the product Makita HR5212C AVT Rotary Hammer 2-Inch SDS Max

Your Name:


Your Email:


Message: Note: HTML is not translated!

Enter the code in the box below: