SPEED-E-ROC is a pourable, rapid setting and hardening, high strength, hydraulic cement compound designed for anchoring and grouting. SPEED-E-ROC has a controlled expansion system and is non-shrink. SPEED-E-ROC has an initial set time of 10-20 minutes at 77° F (25° C) and obtains 5,000 psi (34.4 Mpa) in one hour.
SPEED-E-ROC is ideally suited for anchoring rails, bolts, ties, dowels, reinforcing steel, threaded rods, sign posts, parking meters, street signs and ornamental steel work into concrete or any other properly-prepared, porous, hardened material. SPEED-E-ROC may be used as a precision, highly flowable and rapid-setting grout for machinery base plates, bearing plates and columns. It is suitable for industrial, residential and civil engineering applications. The product can be used in either interior or exterior applications, freeze-thaw and wet environments.
|The following physical properties were obtained using the water to powder ratio of 8 pints (3.8 L) per 50 lb. of SPEED-E-ROC at 75° F (23.8° C).|
|Set Time (Per ASTM C 191)||10 – 20 Mins.|
|Compressive Strength (Per ASTM C 109-air cured)
|* All technical data is typical information, but may vary due to testing methods, conditions and operators.|
50 lb. (22.7 kg) pail yields: 0.50 ft.³ (14.1 L)