No products in the cart.
Water Pumps
Tsurumi LB480 2/3HP Submersible Utility Pump
Availability:
In stock
Brand:Tsurumi
$368.34
In stock
- This Tsurumi Pumps Submersible Water Pump is compact with excellent motor cooling efficiency.
- Allows continuous duty operation at low water levels, plus extended dry run capability.
- Designed to pump sands and debris with minimal wear and clogging.
- V-ring system protects shaft seal from abrasives.
- Silicon carbide-faced mechanical seal.
- 2 in. discharge bore.
- Includes 32 ft. cable.
- Not for use in fish ponds.
| TYPE | Construction Site and Residential Dewatering |
|---|---|
| HP | 2/3 |
| VOLTAGE | 110 |
| AMPS | 6.1 |
| CORD LENGTH | 32 ft. |
| CORD SIZE | 16/3 |
| CORD TYPE | 3-Conductor STOW, Resists Water and Oil |
| DISCHARGE NPT | 2″ |
| GPM @ 1 FT. OF HEAD | 62 |
| GPM OF WATER @ 5 FT. OF HEAD | 62 |
| GPM OF WATER @ 10 FT. OF HEAD | 57 |
| GPM OF WATER @ 15 FT. OF HEAD | 50 |
| GPM OF WATER @ 20 FT. OF HEAD | 44 |
| GPM OF WATER @ 25 FT. OF HEAD | 36 |
| GPM OF WATER @ 30 FT. OF HEAD | 23 |
| GPM OF WATER @ 35 FT. OF HEAD | 11 |
| MAXIMUM HEAD | 39.5 ft. |
| HEIGHT | 11-1/4″ |
| DIAMETER | 7-3/8″ |
| HOUSING | Die Cast Aluminum |
| TOP MATERIAL | Die Cast Aluminum |
| BASE MATERIAL | Steel |
| IMPELLER MATERIAL | Urethane Rubber |
| LENGTH | 11-1/4″ |
| WIDTH | 7-3/8″ |
| MAX. DIA. SOLIDS | 1/4″ |
| MAX. LIQUID TEMP. | 104 Degrees F |
| MIN. SUMP PIT DIA. | 12″ |
| MOTOR TYPE | PSC |
| THERMAL PROTECTION | Automatic |
| MOTOR HOUSING | Die Cast Aluminum |
| PHASE | 1 |
| RPM | 3255 |
| HZ | 60 |
| INSULATION CLASS | E |
| BEARING TYPE | Double Shielded, Permanently Lubricated, High Temperature C3 Ball Bearings Rated for a B-10 Life |
| SHAFT MATERIAL | SS |
| SHAFT SEAL | Silicone Carbide |
There are no reviews yet.