- This Tsurumi Pumps Submersible Water Pump is compact with excellent motor cooling efficiency.
- Allows continuous duty operation at low water levels, plus extended dry run capability.
- V-ring system protects shaft seal from abrasives.
- Silicon carbide-faced mechanical seal.
- 2 in. discharge bore.
- Top discharge design provides maximum motor cooling efficiency for continuous duty work at low water levels and extended dry run capacity.
- Patented oil lifter provides seal face lubrication down to 1/3 of the normal level and extends seal life by ten times.
- Urethane rubber-coated impeller is more abrasion-resistant and lasts up to 3 times longer than a cast iron impeller.
- Double inside mechanical seal with SIC faces provides a long operational life.
- V-ring seal protector protects mechanical seal from abrasive particles.
- Motor has built-in protector.
- Includes 50ft. cable.
Water Pumps
Tsurumi LB800 1HP Submersible Dewatering Pump
Availability:
In stock
Brand:Tsurumi
$529.00
In stock
TYPE | Construction Site and Residential Dewatering |
---|---|
HP | 1 |
VOLTAGE | 115 |
AMPS | 9.6 |
CORD LENGTH | 50 ft. |
CORD SIZE | 14/3 |
CORD TYPE | 3-Conductor STOW, Resists Water and Oil |
DISCHARGE NPT | 2″ |
GPM @ 1 FT. OF HEAD | 82 |
GPM OF WATER @ 5 FT. OF HEAD | 82 |
GPM OF WATER @ 10 FT. OF HEAD | 77 |
GPM OF WATER @ 15 FT. OF HEAD | 72 |
GPM OF WATER @ 20 FT. OF HEAD | 67 |
GPM OF WATER @ 25 FT. OF HEAD | 60 |
GPM OF WATER @ 30 FT. OF HEAD | 53 |
GPM OF WATER @ 35 FT. OF HEAD | 45 |
GPM OF WATER @ 40 FT. OF HEAD | 37 |
GPM OF WATER @ 45 FT. OF HEAD | 28 |
MAXIMUM HEAD | 59 ft. |
HEIGHT | 13-7/16″ |
DIAMETER | 7-9/16″ |
HOUSING | Die Cast Aluminum |
TOP MATERIAL | Die Cast Aluminum |
BASE MATERIAL | Steel |
IMPELLER MATERIAL | Urethane Rubber |
LENGTH | 13-7/16″ |
WIDTH | 7-9/16″ |
MAX. DIA. SOLIDS | 1/4″ |
MAX. LIQUID TEMP. | 104 Degrees F |
MIN. SUMP PIT DIA. | 12″ |
MOTOR TYPE | PSC |
THERMAL PROTECTION | Automatic |
MOTOR HOUSING | Die Cast Aluminum |
PHASE | 1 |
RPM | 3300 |
HZ | 60 |
INSULATION CLASS | E |
BEARING TYPE | Double Shielded, Permanently Lubricated, High Temperature C3 Ball Bearings Rated for a B-10 Life |
There are no reviews yet.